Klebend’s KLE150-W is a single component white adhesive. That is functional for high resistance
laying of ceramic tiles, glass mosaics and homogeneous tiles. The tacking polymers deformability
(superior speradability) and fine finishing of the material affixed.

Features & Benefits

  • Guaranteeing the long life of floors and coverings subject to large temperature variations
  • Mineral adhesive for high-performance, high-deformation laying or overlaying with no vertical slip
  • KLE150-W develops high transversal deformation along with high resistance to
  • The stress of water and freeze/thaw cycles
  • Single-component with very low volatile organic compound emissions

Preparation of Substrates

  • In general, cement-based substrates must be free from dust, oil and grease, dry and free from any rising damp, with no loose, flaky or imperfectly anchored parts such as residual traces of cement, lime and paint, which must be totally removed.
  • The substrate must be stable and without cracks, must have already completed curing hygrometric shrinkage and must present suitable mechanical resistance levels. Undulated areas must be corrected with suitable smoothing and finishing products.
  • Packing: 20 kg bags
  • Colour: White
  • Mixing ration: 5.6 to 6.4 ltrs/ bag 20 kg KLE150-W
  • Pot life: ≥ 4 hr
  • Open time: ≥ 30 min
  • Adjustability: ≥ 45 min
  • Bed thickness: 1.5mm to 10mm
  • Grouting: ≈ 8 hr on wall / ≈ 24 hr on floor
  • Coverage: 1.5 mm thickness it is approximately 100 sq.ft for 20kgs bag with a “v”notch (3mm x 3mm ) trowel when using a solid-bed trowel. For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations.